Skip to content
Home / Custom manufacturing
Custom manufacturing

Custom Alloy Wire Manufacturer — Made to Your Drawing

As an alloy wire factory, we draw to your dimensions — sizes outside the standard range, special tempers, custom spooling, pre-formed rings. Most of what we ship is custom in some dimension.

0.02 mmfinest drawn wire
±3%certified resistance
2–3 weekstypical custom lead

What we customise

01

Dimension

Wire from 0.02 to 10 mm, strip from 0.05 × 0.8 mm. Non-standard sizes quoted from the drawing.

02

Temper & condition

Annealed, quarter-hard to spring temper, or specified tensile and elongation windows.

03

Tolerance class

P4 diameter, ±1.5% resistance per metre, ovality and straightness to specification.

04

Surface

Bright annealed, ultrasonic degreased, oxide-free for vacuum use.

05

Form

Flat wire, ribbon, stranded and braided conductors, pre-formed welding rings.

06

Packing

Traverse spools, level-wound coils, cut lengths, interleaved strip, custom labels and barcodes.

From drawing to shipment

The five steps a custom order passes through.

01

Drawing review

We check feasibility, quote tolerance impact and confirm the melt source.

02

Sample or FAI

First-article inspection report for new geometries, or an evaluation sample.

03

Production

Dedicated drawing route with in-process dimensional sampling.

04

Certification

MTR per lot with your specified characteristics.

05

Packed to your line

Spool type, labels and packing list matched to how you feed the wire.

Realistic limits

Better to know before the drawing goes out.

  • Fine wire: below 0.08 mm, minimum orders start around 3 kg and intermediate anneals add lead time.
  • Over-length: continuous lengths above 2,000 m per spool depend on diameter — ask, do not assume.
  • Tolerance stacking: every tightened tolerance narrows the process window; we will tell you which ones actually matter for your operation.
  • Tooling: new dies and forming tools for exotic sections are quoted once, amortised or charged per order as you prefer.

Send the drawing, get a feasibility answer

Our engineers reply within 24 hours with what is possible, what it costs, and what we would change.

WhatsApp UsContact Us