Skip to content
Home / Quality & certifications
Quality & certifications

The Documents Behind Every Wire Our Factory Ships

Quality at D GO TOP is not a page on a website — it is a certificate that matches the coil in your receiving bay. Here is exactly what every shipment carries.

ISO 9001:2026certified system
EN 10204 3.1MTR with every lot
SGS / BV / TÜVthird-party on request

System certification

Our factory operates a certified quality management system to ISO 9001:2026, covering alloy wire drawing, heat treatment, inspection, packing and export. The certificate scope and a copy are available from the download centre.

Customers with additional scheme requirements — IATF-style PPAP documentation, AD 2000 W0, or customer-specific audits — are handled case by case; tell your quality team to contact ours directly.

What every shipment carries

Standard, no exceptions, no upcharge.

DocumentContentFormat
EN 10204 3.1 MTRHeat chemistry, mechanical properties, dimensions, traceability to coil / spool numberPDF + paper, per lot
Certificate of conformityDeclaration against the agreed standard (GB/T, ASTM, EN, JIS or drawing)PDF + paper, per lot
Packing listSpool / coil numbers, weights, gross & netPaper, per shipment
Origin documentsCertificate of origin, export declaration where applicablePer shipment, as required

Process control on the line

The checks between melt and spool.

01

Incoming melt

Chemistry verified against the mill certificate before drawing.

02

In-process

Diameter, ovality and resistance sampled per draw pass; annealing curves logged.

03

Final inspection

Full dimensional and surface inspection, resistance certification where specified.

04

Release

Lot built, MTR assembled, packing checked against the order confirmation.

Third-party inspection

SGS, Bureau Veritas, TÜV or your appointed inspector are welcome at our works or at the port before shipment. Common scopes: witnessed mechanical testing, chemistry re-verification, dimensional sampling and packing checks. Inspection cost is quoted in the order confirmation — usually a line item, not a surprise.

Claims handling: if material arrives outside specification, report it within 14 days with the coil or spool number. Confirmed non-conforming material is replaced, credited or refunded — see our Terms of Service.

Want our certificate pack before the first order?

Email the technical desk and we will send the ISO 9001 certificate, a specimen MTR and our quality manual summary.

WhatsApp UsContact Us