IATF-level documentation expectations, zero tolerance for lot variation, and a supply chain that has to keep running — automotive is where process discipline shows.
The three requirements that decide whether the wire works here.
Cpk on thickness and resistance, reported per lot, is what an OEM line actually audits — not a typical value printed on a datasheet.
Any change of melt source, drawing route or annealing parameter is notified in writing before shipment, with a first-article sample if you ask.
PPAP-style FAI, control plan and MSA on key characteristics, issued in the format your quality team already works to.
Starting points — the final choice follows the atmosphere, cycle and geometry.
| Application | Grade | Typical size | Why |
|---|---|---|---|
| Cabin heater element | Ni80Cr20 | 0.3–0.8 mm | Fast response, long cycle life |
| Glow plug support | Inconel 601 | 0.5–1.5 mm | Oxidation at 1,000 °C |
| Sensor lead wire | Ni200 / Constantan | 0.15–0.5 mm | Lead and leg wire for T-type sensors |
| Terminal strip | Ni201 strip | 0.10–0.40 mm | Weldable, corrosion resistant |
| EV busbar plating | Nickel 99.9% | per drawing | Contact resistance control |
We supply FAI reports, control plans, MSA on key characteristics and lot traceability in the format your quality team needs. Our own system is ISO 9001:2026.
Any change to melt source, drawing route or annealing parameter is notified in writing before shipment, with a first-article sample if requested.
On stabilised volume lines we can report Cpk on diameter and resistance per metre. Tell us the characteristic and the sample size your SQA needs.
Service temperature, atmosphere, cycle time and joint design — with those four numbers we can recommend a grade and size with the life you need.