
GH4169 wire with 718 cross-reference
An MRO needed GH4169 recognised as 718 by a European auditor, with hardness values for the aged condition on the same certificate.

GH4169, GH3030, GH3128 and GH2132 drawn to 0.1 mm, with the ASTM or AMS equivalent stated on the certificate. For plants running Chinese specifications that still buy to international acceptance.
GH4169 is Inconel 718. GH3030 is close to Nimonic 75. GH3128 is a nickel-chromium-tungsten alloy with no single Western equivalent, which is exactly why the chemistry has to be reported rather than replaced by a grade name.
Buyers outside China often receive GH wire without a cross-reference and cannot qualify it. We issue the GB/T chemistry alongside the nearest ASTM or AMS equivalent, so the document can be reviewed by both sides of the supply chain.
Where an exact equivalent exists we say so; where it does not, we report the chemistry instead of guessing.
Ni-Cr-Fe with Nb and Mo, age hardened for fasteners and turbine parts.
80/20 nickel-chromium for combustion chambers and low-stress hot parts.
Solid-solution strengthened for 950 °C service; chemistry reported in full.
Iron-based with nickel and titanium, age hardened for fasteners.
GH grades behave like their Western equivalents — the drawing route is set per grade, not per name.
Drawn with inter-pass annealing, then finished to the required condition.
Straightened and cut for heading, or spooled for welding.
Annealed or solution treated, straightened for automatic welding.
Need a GH grade we have not listed? Send the GB/T number — we check the chemistry and the equivalent.
Send the GB/T number →The cross-reference is issued with the certificate, not left to the buyer to research.
Where no exact equivalent exists, the full chemistry is reported rather than a misleading grade substitution. Send your specification — our engineers confirm availability and test values before you order.
Because several GH grades have no exact Western twin, the chemistry on the certificate is the primary evidence; the cross-reference is a convenience for reviewers.
Mechanical values depend on the heat treatment. GH4169 and GH2132 are supplied aged when strength is specified, and hardness is reported per lot.
Solution + aged
Continuous, oxidising
Continuous, oxidising
Aged, typical
Annealed grades
Cold drawn wire
The condition and the equivalent are both part of the document package.
Soft for forming before ageing.
GH4169 / GH2132Full strength as delivered.
AgedOxide-free for mesh and springs.
SurfaceDescaled after hot working.
SurfaceFor heading and thread rolling.
FormingEven tension for automated feed.
PackagingThe certificate carries both the GB/T designation and the nearest ASTM or AMS equivalent, plus the full chemistry where no exact match exists.
Five controlled steps, each with a named output — so nothing is agreed verbally and lost between shifts.
We check grade, size, temper, tolerance, packing and delivery date against what the drawing actually needs — and flag anything the process cannot hold.
GH4169 / GH3030 confirmed against your existing grade number, with datasheet and typical test values issued before the order is placed.
Work-hardening grades drawn in short passes with inter-pass annealing.
GH4169 and GH2132 are aged to the specified hardness window before despatch.
Chemistry, mechanical properties, dimensions and surface checked against the order, then packed for export with the documents inside the case.
Four sectors where the drawing calls a GB/T grade but acceptance is international.

GH4169 to the equivalent of 718 for bolts and brackets.

GH3030 for chambers and low-stress hot components.

GH3128 for 950 °C service where 800 series is not enough.

Cross-referenced wire for plants maintaining Western-designed equipment.
The point of buying GH wire outside China is documentation, not the alloy itself.
Printed on the MTR next to the GB/T grade.
Reported where no exact equivalent exists.
GH grades drawn without edge cracking.
Ageing to the specified hardness window.
Values for the condition actually supplied.
One file acceptable to both buyer and end user.
In each case the alloy was easy; the acceptance paperwork was the actual work.

An MRO needed GH4169 recognised as 718 by a European auditor, with hardness values for the aged condition on the same certificate.

Replacement wire for an imported furnace, matched by chemistry because the original grade designation was not available.

Supplied with full chemistry and a statement that no exact AMS equivalent exists, so the designer could approve it on data rather than name.
Tell us the grade, condition, diameter and quantity. We confirm the chemistry and the nearest international equivalent, and quote within 24 hours.
What buyers ask when GH wire has to pass an international review.
Compositionally yes, and it is normally accepted as an equivalent. The certificate states both designations so an auditor does not have to research it.
GH3128 is a nickel-chromium-tungsten alloy with no single AMS equivalent; we report the full chemistry instead of claiming a match.
Yes for GH4169 and GH2132, with hardness tested per lot and reported against the target.
Both, depending on the order. Tell us which standard the acceptance is written against.
From 5 kg for standard grades; aged material usually from 20 kg.
2–3 weeks for annealed stock; 4–6 weeks for aged or non-standard diameters.