Pure nickel, nickel-based alloys, heating & resistance alloys and welding metals — manufactured to international standards with full dimensional and material traceability.
Four product families covering pure nickel, nickel-based alloys, heating & resistance alloys and welding metals.
Pure nickel wire, strip and rod for vacuum furnaces, battery components and electronic parts. 4 product models.
View category →Superalloy, corrosion-resistant and precision grades — Inconel, Monel, Hastelloy, Incoloy. 5 product models.
View category →FeCrAl and nichrome resistance wire for industrial furnaces and heating appliances. 5 product models.
View category →Nickel-based, Ni-Cu and stainless filler wire for TIG, MIG and submerged-arc welding. 4 product series plus process support.
View category →Factory‑direct nickel, heating and welding alloys — engineered for industrial furnaces, household heating appliances, vacuum equipment, corrosive service and welded joints.
Ni200 / Ni201 pure nickel wire, bright annealed, for vacuum furnaces, battery components and caustic service.
4N (99.9%) high-purity nickel wire, vacuum annealed with oxygen under 30 ppm, for vacuum devices, electron tubes and analytical instruments.
Ni200 / Ni201 nickel strip and flat wire, rolled, slit and edge-conditioned in-house for battery tabs, contacts and shielding.
Ni200 / Ni201 nickel bar, rod and plate, forged and rolled blanks for caustic plant, electrodes and heat exchangers.
Inconel 600, 601, 625, 718 and X-750 wire, solution annealed or aged, for furnace fixtures, aerospace fasteners and heat-treat baskets.
Monel 400 and K500, Hastelloy C-276, C-22 and B-2 wire for chemical plant, seawater and chlor-alkali service.
Incoloy 800, 800H, 825 and 925 wire for heat exchangers, furnace components and acid service where 800 series is specified.
Chinese GH superalloy wire with ASTM/AMS cross-reference, for domestic aero, energy and furnace applications.
4J29 Kovar, 4J36 Invar, 1J50 and 1J79 wire with controlled expansion and permeability, for glass-to-metal seals, instruments and transformers.
High-temperature iron-chromium-aluminium heating wire for industrial furnaces, air heaters and oven elements. Excellent oxidation resistance, long service life, cost-effective.
Nickel-chromium resistance wire with stable resistivity and good anti-oxidation performance, for hair dryers, sealing machines, cartridge heaters and household heating devices.
Constantan CuNi44, Manganin and CuNi23 wire with a low temperature coefficient for shunts, precision resistors and thermocouple legs.
Flat strip for ribbon elements and stranded or braided conductors in FeCrAl and nichrome, for flexible heaters and high-current joints.
Heavy-gauge element wire for 1200‑1400 ℃ continuous service in sintering, ceramic and laboratory furnaces, with surface-load calculation support.
ERNi-1, ERNiCr-3, ERNiCrMo-3 and ERNiCrMo-4 TIG rods and MIG spools for nickel alloys, dissimilar joints and cryogenic service.
ERNiCu-7 nickel-copper filler wire for Monel 400 and K500, seawater service and dissimilar joints to steel.
ER308L, ER309L, ER316L and ER2209 duplex MIG and TIG wire for stainless fabrication, dissimilar joints and duplex service.
Flat strip and pre-formed rings in nickel alloy and stainless, cut and formed to your joint geometry for tube-to-tubesheet and orbital TIG.
Filler selection, WPS/PQR guidance, TIG, MIG and SAW parameters and failure analysis — sent with the filler, not sold separately.
Tell us your alloy grade, diameter and quantity — get a factory‑direct comparison quote within 24 hours.
Contact UsP4 and P5 are our in-house diameter-tolerance classes, not ISO 286 IT grades or a GB/T designation: P5 is the general-purpose band and P4 the tighter precision band — at 1.0 mm roughly ±2% and ±1% of diameter. The band that applies to your order is printed on the quotation.
Send us your alloy grade, diameter and required quantity. We provide a cross‑reference quotation reply within 24 hours — factory‑direct price with the same performance requirements.
Get Comparison Quote