Skip to content
Home / Grade cross-reference
Grade cross-reference

GB ↔ ASTM/UNS ↔ EN — on one page

The table our own engineers keep on the wall. Names differ between Chinese and Western standards; the metals behind them, as we stock them, are cross-referenced here with the heat chemistry on the MTR.

28grades listed
4standard systems
±verified per heat
Common nameASTM / UNSGB (China)EN / W.Nr.JISTypical use
Ni200N02200N62.4060NW2200Commercially pure nickel, general
Ni201N02201N42.4061NW2201Low-carbon nickel, above 315 °C
Inconel 600N06600GH6002.4816NCF600Furnace fixtures, caustic
Inconel 601N06601GH6012.4851NCF601Oxidation to 1,200 °C
Inconel 625N06625GH6252.4856NCF625Marine, chemical, bellows
Inconel 718N07718GH41692.4668NCF718Fasteners, springs, age hardened
Inconel X-750N07750GH1452.4669NCF750Springs and seals to 700 °C (continuous)
Monel 400N04400—2.4360NW4400Ni-Cu, seawater, HF acid
Monel K500N05500—2.4375—Age-hardened Ni-Cu
Hastelloy C-276N10276—2.4819—Wet chlorine, mixed acids
Hastelloy C-22N06022—2.4602—Oxidising + reducing media
Hastelloy B-2N10665—2.4617—HCl and H₂SO₄
Incoloy 800 / 800HN08800 / N08810GH800 / GH800H1.4876 / 1.4959NCF800 / NCF800HReformer, cracking furnace
Incoloy 825N08825GH8252.4858NCF825Sulphuric acid, seawater
Incoloy 925N09925———Sour gas, age hardened
0Cr25Al5—0Cr25Al5 (GB/T 1234)— (Kanthal A-1 class)FCH1 (approx.)FeCrAl element wire, 1,300 °C
0Cr27Al7Mo2—0Cr27Al7Mo2 (GB/T 1234)— (no W.Nr.; FeCrAl, not MoSi₂)FCH2 (approx.)FeCrAl, 1,400 °C
Ni80Cr20N06003Cr20Ni80 (GB/T 1234)NiCr 80/20NCH1Nichrome element wire
Ni60Cr15—Cr15Ni60NiCr 60/15NCH2Nichrome, cost balanced
Constantan—6J40 (CuNi40) / CuNi442.0842—Precision resistance, T/C legs
Manganin—6J132.0882 (CuMn12Ni)—Precision resistors
4J29Kovar (ASTM F15)4J291.3981—Glass-to-metal seal, Fe-29Ni-17Co
4J36—4J361.3912—Invar, Fe-36Ni, low expansion
ERNiCr-3N06082—2.4806 (NiCr20Mn3Nb)—Filler, Inconel 82 type
ERNiCrMo-3N06625—2.4831 (NiCr22Mo9Nb)—Filler, 625 type
ERNiCu-7N04019—2.4377—Filler, Monel 60 type
ER308L / ER316LS30883 / S31683H022Cr21Ni10 / H022Cr19Ni12Mo21.4316 / 1.4430YS308L / YS316LStainless filler
ER2209S39209—1.4462—Duplex filler

How to use this table

Equivalence is a starting point, not a guarantee. JIS designations follow JIS G 4901 / 4902 (NCF and NW series) and JIS C 2520 (NCH / FCH resistance wire); where JIS lists no grade we leave the cell blank rather than repeat the UNS number. FeCrAl has no EN Werkstoff number — Kanthal A-1 is a commercial grade of similar composition, not an equivalent, and Kanthal Super is a MoSi2 element, a different material family. Most nickel alloys map cleanly (Ni200 = N6 = 2.4060), but several Chinese grades have no exact Western counterpart: GH3030 and GH3128 are GB-specific superalloys, and 0Cr25Al5 is the GB designation for a Kanthal-type FeCrAl rather than a unified grade. Where the drawing calls for one system and the supplier stock uses another, ask for the heat chemistry and compare element by element — that comparison is exactly what we put on every quotation.

Can't find your grade? Send the chemical composition and service conditions instead of the name — we will match it to a stocked grade and put both analyses on the certificate.

Need the full data sheet for a grade?

Every cross-referenced grade has a TDS with chemistry, mechanicals and temperature data — request it from the download centre.

WhatsApp UsContact Us