Skip to content
Heating · Nickel · Welding Alloy Wire

Alloy Wire Factory & Manufacturer — FeCrAl, Nichrome & Pure Nickel.

From FeCrAl and nichrome heating wire to pure nickel, nickel-based alloys and welding filler metals — drawn, bright-annealed and spooled in our own plant in Jiangsu, then shipped to 45+ countries.

  • ISO 9001:2026 certified plant
  • 12,000 m² plant · 3,500 t annual capacity
  • Wire drawn from 0.02 mm to 10 mm
  • Trial orders from 10 kg
Pure Nickel · Ni200 / Ni201

Pure Nickel Wire & Strip — Ni200 / Ni201, Battery-Ready.

Ni200 / Ni201 wire, strip and busbar drawn in-house from 0.05 mm — the trusted choice for battery tabs, vacuum devices and electroplating anodes.

  • Ni ≥ 99.0% (Ni200 / Ni201) · 4N 99.9% on request
  • Wire 0.05 – 5.0 mm · strip 0.05 – 2.0 mm
  • Soft annealed temper, easy tab forming
  • RoHS & REACH compliant, batch traceable
Nickel-Based Alloys · Inconel · Monel · GH

Alloy Wire Built for 1,100 °C Heat and Corrosive Media.

Inconel 600/625/718, Monel 400, Hastelloy C-276 and Chinese GH grades — solution-treated, descaled and spooled for furnace, chemical and aerospace service.

  • Oxidation resistance to 1,100 °C
  • Inconel · Monel · Hastelloy · Incoloy
  • GH4169 · GH3030 · GH3128 in stock
  • EN 10204 3.1 MTR with every coil
Welding Metals · AWS A5.14 / A5.9

Filler Wire for Nickel, Monel and Stainless Joints.

ERNi-1, ERNiCr-3, ERNiCrMo-3 and ER308L/316L filler wire and strip — clean feed, stable arc, and weld metal that matches the parent alloy.

  • AWS A5.14 / A5.9 classified lots
  • TIG · MIG · SAW wire from 0.8 mm
  • Welding strip & rings, custom sizes
  • Process support from our engineers
2018Manufacturing since
12,000 m²Plant area, Jiangsu
3,500 tAnnual capacity
45+Export countries
Product range

Four alloy families. One qualified supply chain.

Each family is stocked as drawn wire, flat wire and rod — in the grades your drawing, or your cross-reference sheet, already asks for.

01 / Pure Nickel

Pure Nickel Wire, Strip & Flat Wire

Ni200 / Ni201 drawn wire and strip for vacuum components, battery tabs, electronic leads and caustic service. Low gas content, clean bright surface.

Ni200Ni201Ni ≥ 99.0%
View grades →
02 / Nickel-Based Alloys

Nickel-Based Alloy Wire

Superalloy and corrosion-resistant grades for furnace fixtures, chemical plant, heat exchangers and high-temperature fasteners.

Inconel 625Monel 400Hastelloy C-276
View grades →
03 / Heating & Resistance

Heating & Resistance Alloy Wire

FeCrAl, nichrome and copper-nickel resistance wire for industrial furnaces, appliance heating elements and precision resistors.

0Cr25Al5Ni80Cr20CuNi44
View grades →
04 / Welding Metals

Welding Filler Wire & Rings

Nickel-based, nickel-copper and stainless filler metals in TIG, MIG and SAW form — spooled to your wire-feed specification.

ERNiCrMo-3ERNiCu-7ER308L
View grades →
Our plant

One plant. Drawing, annealing and spooling under one roof.

Founded in 2018 in Jiangsu, our 12,000 m² plant draws, bright-anneals, spools and tests alloy wire in a single continuous flow — so a change of grade never leaves the building, and the certificate matches the spool in your hand.

  1. 01

    Wire drawing

    Multi-pass drawing on wet and dry lines, 0.02 mm to 10 mm, with in-line diameter feedback on every pass.

  2. 02

    Bright annealing

    Continuous bright annealing under protective atmosphere to hold resistivity, elongation and an oxide-free surface.

  3. 03

    Test & spool

    Resistivity, tensile and dimensional checks, then spooled to your weight, bore and labelling requirement.

Book a plant visit or video tour →
Why D GO TOP

Supply built around your specification.

Most alloy wire problems are not metallurgy problems — they are handover problems between mill, trader and drawing line. We removed the handovers.

2018Manufacturing since
12,000 m²Plant area, Jiangsu
3,500 tAnnual capacity
45+Export countries

ISO 9001:2026 · EN 10204 3.1 material test report with every shipment.

Four alloy families, one supply chain

FeCrAl, nichrome, pure nickel, nickel alloys and welding wire from one plant — one origin, one test report, one shipment to clear.

Drawn down to 0.02 mm

Fine-wire capability with controlled ovality and a clean surface, so fine elements and small-diameter leads behave the same on every spool.

Verified at every stage

Incoming billet check, in-process diameter control, final resistivity and tensile test — recorded against the heat number you receive.

From trial spool to container

Standard grades from 10 kg, repeat production to tonnage without re-qualifying a new supplier halfway through the project.

Certified management systems

Documented standards. Consistent wire.

Buyers in Europe, North America and Southeast Asia qualify us on paperwork first. Here is what ships with the spool.

Quality management

ISO 9001:2026

Documented process control from incoming billet to final inspection and packing.

Material traceability

EN 10204 3.1 MTR

Mill test report with heat number, chemistry and mechanical results for every shipment.

Market compliance

RoHS & REACH

Declarations prepared for EU-bound heating, electronic and battery component orders.

Grade cross-reference

GB · ASTM · EN

Engineers map your existing grade number to an equivalent we draw, test and stock.

Where our wire goes

Six industries, one same requirement.

Heat that does not vary, resistance that does not drift, and a surface that does not fail early.

01

Industrial furnaces & heat treatment

FeCrAl and nichrome elements for roller hearth, tempering, annealing and sintering furnaces.

02

Home appliance heating

Precision nichrome for hair dryers, ovens, toasters, fan heaters and cartridge heaters.

03

Vacuum & battery equipment

Pure nickel wire and strip for vacuum components, battery tabs and electrode parts.

04

Packaging machinery

Stable resistance wire for sealing bars, hot-cut knives and form-fill-seal packaging lines.

05

Automotive components

Resistance and nickel wire for auxiliary heating, sensor leads and connector parts.

06

New energy & electronics

Nickel and nickel-alloy wire for battery, connector and electronic assembly lines.

Global customer partnerships

Buyers who kept the wire, not just the invoice.

Long-run furnace users, distributors and equipment builders — the ones who re-order.

★★★★★
“We replaced an imported FeCrAl grade with 0Cr25Al5 from this plant. Eleven months of furnace running, no unexpected shutdowns, same heating performance at 38% lower procurement cost.”
Li WeiProduction Director · Heat-treatment group, Jiangsu
★★★★★
“Diameter and resistivity matched the certificate on every delivery. That is what we actually buy — a spool we do not have to re-check before it goes on the line.”
Purchasing ManagerHeating element distributor · Germany
★★★★★
“They mapped our old grade number to their equivalent and had trial spools out in ten days. Far easier than qualifying a new mill from scratch.”
Process EngineerIndustrial furnace builder · Türkiye
45+Export countries
400+Active buyers
2018Manufacturing since
Technical insights

What we learn on the drawing line.

Grade selection, failure analysis and cost comparison — written for the engineer who has to sign off the specification.

Order questions

Answers before the RFQ.

The five questions buyers and engineers ask us most — answered with the numbers we actually work to.

What is your minimum order quantity (MOQ)?

For standard spool alloy wire, spools start at 5 kg for fine sizes and 25 kg for standard element diameters; typical production orders run 50–100 kg. Large-diameter special alloy wire can be ordered from 10–20 kg. For fully customised non-standard grades, talk to our sales team.

What are your standard production lead times?

Common standard alloy grades: 2–3 weeks after order confirmation. Special or custom alloy formula: 4–6 weeks. Priority production can be arranged for urgent projects.

Can you provide OEM / ODM service?

Yes — custom spool labels, special packaging, custom tolerance, special surface treatment and custom alloy formula. We can produce to your drawing or technical specification sheet.

What certifications do you supply?

Our factory holds ISO 9001:2026 certification. Every shipment can be accompanied by a material test report (MTR) and certificate of conformity.

Which payment terms can you accept?

T/T and L/C. General trade term: 30% deposit after order confirmation, balance against copy of shipping documents.

Can you match a grade we already use?

Send the grade number and the property you rely on — resistivity, max temperature or chemistry. We cross-reference to a GB / ASTM / EN equivalent and confirm with trial spools.

Request a quotation

Send one drawing. Get a quoted spool.

Tell us the grade, diameter and quantity — or send the drawing you already have. An engineer reviews it, and you get a factory-direct quotation with lead time inside 24 hours.

  • Cross-reference: we match your existing grade to an equivalent we can draw
  • Sample spools for qualification before the bulk order
  • Low MOQ on special-specification industrial heating wire
  • Engineering review of custom specifications within 48 hours
WhatsApp UsContact Us